10 ounces (with batteries).
2.5 W x 4.5 H x 1.24 D inches
(63.5 W x 114.3 H x 31.5 D mm).
-20 to 120F (-30 to 50C).
Extruded aluminum body
with nickel-plated aluminum
end caps (gasket sealed).
Sealed membrane that is
resistant to both water and
Six or nine tactile-feedback keys.
Dual-element (transmit and
1 to 10 MHz frequency range.
Locking quick disconnect
4 foot cable.
Custom transducers available
for special applications.
Two 1.5V alkaline or
1.2V NiCad AA cells.
Typically operates for
80 hours on alkaline and
20 hours on NiCad.
Display flashes when battery is
low. Unit turns off automatically
when battery is too low to
Multi-function 4.5 digit liquid
crystal display with 0.500 inch
numerals, backlit for use in
poor light conditions.
Backlight is selectable on/off/auto
(illuminates only when taking a
Bar graph indicates stability
Comes complete with cable and
PC software (MX-5 DL only).
Numeric data storage, 10 files of
100 readings per file, for 1000 readings
(MX-5 DL only).
Factory calibration traceable to NIST
5 year limited.
Measures from 0.025 to 19.999
inches (0.63 to 500 millimeters).
Range dependent on material
and transducer type.
English & Metric
0.001 inches (0.01 millimeters)
0.0492 to .5511 in/μs.
(1250 to 14,000 m/sec)
Four readings per second for
single point measurements, or
16 per second in
captures the minimum thickness.
Features (MX-5, MX-5-DL)
Enter acceptable thickness value,
unit will display+/- the difference
from the value entered.
Enter a minimum acceptable
thickness value. If measurement
falls below minimum, red LED will
illuminate and sound beeper. If
measurement is above minmum
value, green LED will illuminate.
RS232 serial interface. PC software
& USB converter cable included