Frequency field: from 0.5 to 15 MHz,
Tuning: 0.5÷3, 2.5÷7, 7÷12MHz and
Inspection depth: from 0mm to 15m (RDG2500-2500S),
from 0mm to 10m - (RDG2000) (O.L. Fe).
Calibrated delay: from 0 mm to 15m - (RDG2500-2500S)
from 0mm a 10m - (RDG2000) (O.L. Fe).
P.R.F.: Selectable 15 to 5000Hz (RDG2500-2500S),
from 15 to 1500Hz (RDG2000).
Offset: from 0 to 2.5 msec.
Velocity: from 1000 to 10000 m/s.
Pulse voltage: bipolar square wave from 50÷400 +Burst,
From 50÷250V without Burst (RDG2000).
Gain: 0-110 dB (0÷80 by 0.1, 1, 2, 6 e 10dB steps +,
attenuator filter echo 0÷30dB).
Threshold: 0-50% HS linear with led alarm.
- Interface rotating probe (Only for RDG 2500S).
- Reflection and through-transmission.
- Gate distance and amplitude measurement.
Echo - Echo distance.
Trigonometric view of beam path surface, distance
and depth of indication, curve surface (CSC only for
RDG2500 - 2500S).
2 Gate for measuring of distance and amplitude
Cursor for measuring, distance and amplitude.
Echo start for immersion control (RDG2500 - 2500S).
Display: LCD Colour TFT, display area 153 x 93 mm
(800 x 480 pixels).
USB connector: For PC connection .
Battery charger: 90 ÷ 260Vac, 50-60Hz.
Power: rechargeable Li-ion batteries of 14,4V,
autonomy up to 14 hours with indication of batteries
Recharge time: 4 hours.
Weight: 1,6 Kg with battery kit.
Dimensions: 270 x 165 x 65 mm.
Working temperature: from –10°C to +50°C.
Storage temperature: from –20°C to +60°C.
DAC curve: up to 10 point stored; displayed 3 curves
(0, -6, -12dB) and one custom.
AVG/DGS: based on universal diagram.
TGC curve: max. 10 points, dynamic max. 80dB.
Dual sensitivity after the end of the curve.
- Echo filter attenuatorn 0 ÷ 30 dB.
Monitor: 2 completely independents gates with alarm,
position and width, controllable over full range + gate
IF for synchronism gate 1 and 2 ( only for RDG2500 -
Amplification 0 -100% FSH.
Trigger: Polarity positive / negative with audible and
- Freezing function.
- Echodynamic analysis.
- Autocalibration on two echoes.
Storage: 50 calibration and 1000 A-Scan (RDG2000).
100 calibration and 1000 A-Scan (RDG2500).
100 calibration +50 (for rotating probe) and 1000
Data Logger: 10000 data of thickness (RDG2500 - 2500S)
- 4000 data (RDG2000).
- Possibility to A-Scan storage with AVG/DGS curves.
- Possibility of recall setting in automatical and codified
mode (with rotating probe RDG2500S).
Unit of measurement: Metric (mm), Inch (in) or time
Help on line: Instant operator guide, with frontal dedicated
- 2 main languages (Italian and English).